EasyManua.ls Logo

Yealink SIP-T58V/A

Yealink SIP-T58V/A
842 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting Up Your System
121
Parameters
Permitted Values
Default
Triggers the power on feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process when powered
on.
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
static.auto_provision.repeat.enable
0 or 1
0
Description:
Triggers the repeatedly feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process repeatedly.
Web User Interface:
Settings->Auto Provision->Repeatedly
Phone User Interface:
None
static.auto_provision.repeat.minutes
Integer from 1 to
43200
1440
Description:
Configures the interval (in minutes) for the IP phone to perform an auto provisioning
process repeatedly.
Note: It works only if the value of the parameter “static.auto_provision.repeat.enable” is set
to 1 (On).
Web User Interface:
Settings->Auto Provision->Interval(Minutes)
Phone User Interface:
None
static.auto_provision.weekly.enable
0 or 1
0

Table of Contents

Related product manuals