Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
128
Parameters
Permitted Values
Default
Description:
Enables or disables the IP phone to keep user personalized settings after auto
provisioning.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), <MAC>-local.cfg file generates and personalized non-static
settings configured via web or phone user interface will be kept after auto
provisioning.
Note: The provisioning priority mechanism (phone/web user interface >central
provisioning >factory defaults) takes effect only if the value of this parameter is set
to 1 (Enabled). If the value of the parameter “overwrite_mode” is set to 1 in the boot
file, the value of this parameter will be forced to set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
static.auto_provision.custom.sync
0 or 1
0
Description:
Enables or disables the IP phone to upload the <MAC>-local.cfg file to the server
each time the file updates, and download the <MAC>-local.cfg file from the server
during auto provisioning.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will upload the <MAC>-local.cfg file to the
provisioning server or a specific server each time the file updates to back up this file.
During auto provisioning, the IP phone will download the <MAC>-local.cfg file from
the provisioning server or a specific server to override the one stored on the phone.
Note: It works only if the value of the parameter
“static.auto_provision.custom.protect” is set to 1 (Enabled). The upload/download
path is configured by the parameter “static.auto_provision.custom.sync.path”.
Web User Interface:
None
Phone User Interface:
None