Yealink SIP-T58V/A User Manual

Configuring Advanced Features
169
Parameters
Permitted Values
Default
Account->Register->SIP Server Y->Server Host
Phone User Interface:
Settings->Advanced (default password: admin) ->Accounts->SIP ServerY
account.X.sip_server.Y.port
(X ranges from 1 to 16, Y ranges from 1 to 2)
Integer from 0 to
65535
5060
Description:
Configures the port of the SIP server Y that specifies registrations for account X.
Example:
account.1.sip_server.1.port = 5060
Note: If the value of this parameter is set to 0, the port used depends on the value
specified by the parameter “account.X.sip_server.Y.transport_type”.
Web User Interface:
Account->Register->SIP Server Y->Port
Phone User Interface:
None
account.X.outbound_proxy_enable
(X ranges from 1 to 16)
0 or 1
0
Description:
Enables or disables the IP phone to send requests to the outbound proxy server for
account X.
0-Disabled
1-Enabled
Web User Interface:
Account->Register->Enable Outbound Proxy Server
Phone User Interface:
Settings->Advanced (default password: admin) ->Accounts->Outbound Status
account.X.outbound_proxy.Y.address
(X ranges from 1 to 16, Y ranges from 1 to 2)
IP address or
domain name
Blank
Description:
Configures the IP address or domain name of the outbound proxy server Y for account X.
Example:
account.1.outbound_proxy.1.address = 10.1.8.11
Note: It works only if the value of the parameter “account.X.outbound_proxy_enable” is

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English