Yealink SIP-T58V/A

Configuring Advanced Features
187
Details of Configuration Parameters:
Parameters
Permitted Values
Default
local_time.manual_time_enable
0 or 1
0
Description:
Enables or disables the IP phone to obtain time and date from manual settings.
0-Disabled (obtain time and date from NTP server)
1-Enabled (obtain time and date from manual settings)
Web User Interface:
Settings->Time & Date->Manual Time
Phone User Interface:
None
local_time.time_format
0 or 1
1
Description:
Configures the time format.
0-Hour 12
1-Hour 24
If it is set to 0 (Hour 12), the time will be displayed in 12-hour format with AM or PM
specified.
If it is set to 1 (Hour 24), the time will be displayed in 24-hour format (e.g., 2:00 PM displays
as 14:00).
Web User Interface:
Settings->Time & Date->Time Format
Phone User Interface:
Settings->Basic->Display->Time & Date->Time&Date Format->Time Format
local_time.date_format
0, 1, 2, 3, 4, 5 or 6
0
Description:
Configures the date format for the date displayed in the control center.
Valid values are:
0-WWW MMM DD
1-DD-MMM-YY
2-YYYY-MM-DD
3-DD/MM/YYYY