Yealink SIP-T58V/A

Configuring Advanced Features
217
Parameters
Permitted
Values
Default
features.send_pound_key
0 or 1
0
Description:
Enables or disables the IP phone not to send any pound key when pressing double #.
0-Disabled (Send one pound key by pressing double #)
1-Enabled (Do not send any pound key when pressing double #)
Note: It works only if the value of the parameter “features.key_as_send” is set to 1 (Enabled).
Web User Interface:
Features->General Information->Send Pound Key
Phone User Interface:
None
To configure a send key via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Key As Send.
3. Click Confirm to accept the change.
To configure a send tone and key tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Key Tone.