Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
224
dialplan_replace_rule.url
Details of Configuration Parameter:
Parameter
Permitted
Values
Default
dialplan_replace_rule.url
URL within 511
characters
Blank
Description:
Configures the access URL of the replace rule template file.
Example:
dialplan_replace_rule.url = http://192.168.10.25/dialplan.xml
During the auto provisioning process, the IP phone connects to the provisioning server
“192.168.10.25”, and downloads the replace rule file “dialplan.xml”.
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
None
Phone User Interface:
None
Dial-now
Dial-now is a string used to match numbers entered by the user. When entered numbers match
the predefined dial-now rule, the IP phone will automatically dial out the numbers without
pressing the send key. IP phones support up to 100 dial-now rules, which can be created either
one by one or in batch using a dial-now rule template. For more information on how to
customize a dial-now template, refer to Customizing Dial-now Template File on page 227.
Delay Time for Dial-now Rule
The IP phone will automatically dial out the entered number, which matches the dial-now rule,
after a specified period of time.
Procedure
Dial-now rule can be created using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Create the dial-now rule for the IP
phone.
Parameters:
dialplan.dialnow.rule.X
dialplan.dialnow.line_id.X