Yealink SIP-T58V/A

Configuring Advanced Features
237
Details of Configuration Parameters:
Parameters
Permitted Values
Default
dialplan.digitmap.enable
0 or 1
0
Description:
Enables or disables the digit map feature for the IP phone.
0-Disabled
1-Enabled
Note: The value configured by the parameter “account.X.dialplan.digitmap.enable” takes
precedence over that configured by this parameter.
Web User Interface:
None
Phone User Interface:
None
dialplan.digitmap.string
String within 2048
characters
[2-9]11 | 0T |
011xxx.T |
[0-1][2-9]xx
xxxxxxx | [2-9]xx
xxxxxxx |
[2-9]xxxT | **x.T
| +x.T| 00x.T
Description:
Configures digit map pattern used for the dial plan.
Example:
dialplan.digitmap.string = <[2-9]x:86>3.T|0x.!|1xxx
Note: The string must be compatible with the digit map feature of MGCP described in 2.1.5
of RFC 3435. It works only if the value of the parameter “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.string” takes precedence over that configured by
this parameter.
Web User Interface:
None
Phone User Interface:
None
dialplan.digitmap.interdigit_long_timer
Integer from 0 to 255
10