Yealink SIP-T58V/A

Configuring Advanced Features
275
Procedure
Live dialpad can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure live dialpad.
Parameters:
phone_setting.predial_autodial
phone_setting.inter_digit_time
Web User Interface
Configure live dialpad.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-preference
&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.predial_autodial
0 or 1
0
Description:
Enables or disables the live dialpad feature.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will automatically dial out the entered phone number
on the dialing screen without pressing a send key.
Web User Interface:
Settings->Preference->Live Dialpad
Phone User Interface:
None
phone_setting.inter_digit_time
Integer from 1 to
14
4
Description:
Configures the delay time (in seconds) for the IP phone to automatically dial out the entered
digits without pressing a send key.
Note: It works only if the value of the parameter “phone_setting.predial_autodial” is set to 1
(Enabled) and the value of the parameter “dialplan.digitmap.enable” is set to 0 (Disabled).
Web User Interface:
Settings->Preference->Inter Digit Time(1~14s)
Phone User Interface: