Yealink SIP-T58V/A - Page 325

Configuring Advanced Features
303
=mod_data&p=account-basic&q=l
oad&acc=0
Phone User Interface
Configure anonymous call rejection.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.reject_anonymous_call
(X ranges from 1 to 16)
0 or 1
0
Description:
Triggers the anonymous call rejection feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), the IP phone will automatically reject incoming calls from users enabled
anonymous call feature. The anonymous user’s phone touch screen presents “Anonymity
Disallowed”.
Web User Interface:
Account->Basic->Local Anonymous Rejection
Phone User Interface:
Settings->Features->Anonymous->Line X->Anonymous Rejection
account.X.send_anonymous_rejection_code
(X ranges from 1 to 16)
0 or 1
0
Description:
Configures the IP phone to send anonymous rejection on/off code to activate/deactivate the
server-side anonymous call rejection feature for account X.
0- Off code
1- On code
If it is set to 0 (Off Code), the IP phone will send anonymous rejection off code to the server
when you deactivate the anonymous call rejection feature.
If it is set to 1 (On Code), the IP phone will send anonymous rejection on code to the server
when you activate the anonymous call rejection feature.
Web User Interface:
Account->Basic->Send Anonymous Rejection Code
Phone User Interface:
Settings->Features->Anonymous->Line X->Send Rejection Code
account.X.anonymous_reject_oncode
(X ranges from 1 to 16)
String within 32
characters
Blank