Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
308
Parameters
Permitted Values
Default
If it is set to 1 (Custom), you can configure DND feature for each or all accounts.
Web User Interface:
Features->Forward&DND->DND->Mode
Phone User Interface:
None
account.X.dnd.enable
(X ranges from 1 to 16)
0 or 1
0
Description:
Triggers DND feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), the IP phone will reject incoming calls with a busy signal (configured by
the parameter “features.dnd_refuse_code”) on account X.
Note: It works only if the value of the parameter “features.dnd_mode” is set to 1 (Custom).
Web User Interface:
Features->Forward&DND->DND->DND Status
Phone User Interface:
Settings->Features->DND->AccountX->Status
account.X.dnd.on_code
(X ranges from 1 to 16)
String within 32
characters
Blank
Description:
Configures the DND on code to activate the server-side DND feature for account X. The IP
phone will send the DND on code to the server when you activate DND feature for account X
on the IP phone.
Example:
account.1.dnd.on_code = *73
Note: It works only if the value of the parameter “features.dnd_mode” is set to 1 (Custom).
Web User Interface:
Features->Forward&DND->DND On Code
Phone User Interface:
Settings->Features->DND->AccountX->On Code
account.X.dnd.off_code
(X ranges from 1 to 16)
String within 32
characters
Blank