Administrator’s Guide for SIP-T5 Series Smart Media Phones
352
2. Select the desired value from the pull-down list of Fwd International.
3. Click Confirm to accept the change.
To configure call forward in phone mode via phone user interface:
1. Tap Settings->Features->Call Forward.
2. Tap the desired forwarding type.
3. Depending on your selection:
a) If you tap Always Forward:
1) Tap the On radio box in the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward To field.
3) (Optional.) Enter the always forward on code or off code respectively in the On
Code or Off Code field.
b) If you tap Busy Forward:
1) Tap the On radio box in the Busy Forward field.
2) Enter the destination number you want to forward incoming calls to when the
phone is busy in the Forward To field.
3) (Optional.) Enter the busy forward on code or off code respectively in the On
Code or Off Code field.
c) If you tap No Answer Forward:
1) Tap the On radio box in the No Answer Forward field.
2) Enter the destination number you want to forward unanswered incoming calls to
in the Forward To field.
3) Tap the After Ring Time field.
4) Tap the desired ring time to wait before forwarding in the pop-up dialog box.
The default ring time is 12 seconds.
To Next Page
Loading...
Need help?
General
