Yealink SIP-T58V/A

Configuring Advanced Features
359
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.conf_type
(X ranges from 1 to 16)
0 or 2
0
Description:
Configures the network conference type for account X.
0-Local Conference
2-Network Conference
If it is set to 0 (Local Conference), conferences are set up on the IP phone locally.
If it is set to 2 (Network Conference), conferences are set up by the server.
Web User Interface:
Account->Advanced->Conference Type
Phone User Interface:
None
account.X.conf_uri
(X ranges from 1 to 16)
SIP URI within
511 characters
Blank
Description:
Configures the network conference URI for account X.
Example:
account.1.conf_uri = conference@example.com
Note: It works only if the value of the parameter “account.X.conf_type” is set to 2 (Network
Conference).
Web User Interface:
Account->Advanced->Conference URI
Phone User Interface:
None
To configure the network conference via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Network Conference from the pull-down list of Conference Type.