Configuring Advanced Features
371
To configure a directed call pickup key via web user interface:
1. Click on DSSKey->Line Key (or Programable Key/Ext Key).
2. In the desired DSS key field, select Direct Pickup from the pull-down list of Type.
3. Enter the directed call pickup code followed by the specific extension in the Value field.
4. (Optional.) Enter the string that will appear on the touch screen in the Label field.
5. Select the desired line from the pull-down list of Line.
6. Click Confirm to accept the change.
To configure the directed call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the directed call pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
To Next Page
Loading...
