Yealink SIP-T58V/A

Configuring Advanced Features
375
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
features.pickup.group_pickup_enable
0 or 1
0
Description:
Enables or disables the IP phone to display the GPickup key when the IP phone is on the
pre-dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Call Pickup->Group Call Pickup
Phone User Interface:
None
account.X.group_pickup_code
(X ranges from 1 to 16)
String within
32 characters
Blank
Description:
Configures the group pickup code for account X.
Example:
account.1.group_pickup_code = *69
Note: The group call pickup code configured on a per-line basis (configured by the
parameter “account.X.group_pickup_code”) takes precedence over that configured on a
phone basis (configured by the parameter “features.pickup.group_pickup_code”).
Web User Interface:
Account->Advanced->Group Call Pickup Code
Phone User Interface:
None
features.pickup.group_pickup_code
String within
32 characters
Blank
Description:
Configures the group call pickup code on a phone basis.
Example:
features.pickup.group_pickup_code = *98
Note: The group call pickup code configured on a per-line basis (configured by the
parameter “account.X.group_pickup_code”) takes precedence over that configured on a
phone basis (configured by the parameter “features.pickup.group_pickup_code”).