Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
382
http://<phoneIPAddress>/servlet?m=
mod_data&p=account-adv&q=load&
acc=0
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
account.X.dialoginfo_callpickup
(X ranges from 1 to 16)
0 or 1
0
Description:
Enables or disables the IP phone to pick up a call according to the Replaces header of the
INVITE message for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), call pickup is implemented through SIP signals.
Web User Interface:
Account->Advanced->Dialog Info Call Pickup
Phone User Interface:
None
To configure dialog info call pickup via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.