Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
388
Procedure
Call number filter can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the characters the IP
phone filters when dialing.
Parameter:
features.call_num_filter
Web User Interface
Configure the characters the IP
phone filters when dialing.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-general&q
=load
Details of Configuration Parameter:
Parameter
Permitted Values
Default
features.call_num_filter
String within 99
characters
?,-( )
Description:
Configures the characters the IP phone filters when dialing.
If the dialed number contains configured characters, the IP phone will automatically filter
these characters when dialing.
Example:
features.call_num_filter = ,-12
If you dial 3-61, the IP phone will filter the characters - and 1, and then dial out 36.
Note: If it is left blank, the IP phone will not automatically filter any characters when dialing.
If you want to filter just a space, you have to set the value to “ ,” (a space first followed by a
comma).
Web User Interface:
Features->General Information->Call Number Filter
Phone User Interface:
None
To configure the characters the IP phone will filter via web user interface:
1. Click on Feature->General Information.