Yealink SIP-T58V/A

Configuring Advanced Features
413
Example of a SIP INVITE message:
INVITE sip:101@10.2.1.48:5060;user=phone SIP/2.0
Via: SIP/2.0/UDP 10.3.20.6:5060;branch=z9hG4bK2475812834
From: "1010" <sip:1010@10.2.1.48:5060>;tag=3747068208
To: <sip:101@10.2.1.48:5060;user=phone>
Call-ID: 0_4008470062@10.3.20.6
CSeq: 1 INVITE
Contact: <sip:1010@10.3.20.6:5060>
Content-Type: application/sdp
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH,
UPDATE, MESSAGE
Max-Forwards: 70
User-Agent: Yealink T58 58.80.0.5
Allow-Events: talk,hold,conference,refer,check-sync
Content-Length: 300
Procedure
Send user=phone can be configured using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure send user=phone feature on
a per-line basis.
Parameter:
account.X.enable_user_equal_phone
Web User Interface
Configure send user=phone feature on
a per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?m=m
od_data&p=account-adv&q=load&acc
=0
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
account.X.enable_user_equal_phone
(X ranges from 1 to 16)
0 or 1
0
Description:
Enables or disables the IP phone to add “user=phone” to the SIP header of the INVITE
message for account X.
0-Disabled
1-Enabled