Yealink SIP-T58V/A

Configuring Advanced Features
417
Call-ID: 1_2369214377@10.3.20.14
CSeq: 2 REGISTER
Contact: <sip:11@10.3.20.14:5060;line=1da6aa8d7254654>
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH,
UPDATE, MESSAGE
Max-Forwards: 70
User-Agent: Yealink T58 58.80.0.5
Expires: 0
Allow-Events: talk,hold,conference,refer,check-sync
Line: 1
Content-Length: 0
Procedure
SIP send line can be configured using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure SIP send line on a
per-line basis.
Parameter:
account.X.register_line
Web User Interface
Configure SIP send line on a
per-line basis.
Navigate to:
http://<phoneIPAddress>/servle
t?m=mod_data&p=account-adv
&q=load&acc=0
Details of the Configuration Parameter:
Parameter
Permitted
Values
Default
account.X.register_line
(X ranges from 1 to 16)
0 or 1
0
Description:
Enables or disables the IP phone to add line number to the SIP header of the REGISTER
message for account X.
0-Disabled
1-Enabled
Web User Interface:
Account->Advanced->SIP Send Line
Phone User Interface: