Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
454
Parameters
Permitted
Values
Default
Example:
ldap.numb_attr = mobile ipPhone
This requires the “mobile” and “ipPhone” attributes set for each contact record on the LDAP
server.
Web User Interface:
Directory->LDAP->LDAP Number Attributes
Phone User Interface:
None
ldap.display_name
String within
99 characters
Blank
Description:
Configures the display name of the contact record displayed on the touch screen. The value
must start with “%” symbol.
Example:
ldap.display_name = %cn
The cn of the contact record is displayed on the touch screen.
Web User Interface:
Directory->LDAP->LDAP Display Name
Phone User Interface:
None
ldap.version
2 or 3
3
Description:
Configures the LDAP protocol version supported by the IP phone. Make sure the protocol
value corresponds with the version assigned on the LDAP server.
Web User Interface:
Directory->LDAP->Protocol
Phone User Interface:
None
ldap.call_in_lookup
0 or 1
0
Description:
Enables or disables the IP phone to perform an LDAP search when receiving an incoming
call.