Yealink SIP-T58V/A User Manual

Administrator’s Guide for SIP-T5 Series Smart Media Phones
456
Parameters
Permitted
Values
Default
For example,
If the phone receives an incoming call from the phone number 0044123456789, it will
search 0044123456789 from the LDAP sever first, if no result found, it will search
+44123456789 from the server again. The phone will display all the search results.
Note: It works only if the value of the parameter “ldap.call_in_lookup” is set to 1 (Enabled).
You may need to set the value of the parameter “ldap.name_filter” to be
(|(cn=%)(sn=%)(telephoneNumber=%)(mobile=%)) for searching the telephone numbers
starting with ”+” symbol.
Web User Interface:
None
Phone User Interface:
None
LDAP Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring DSS
Key on page 750.
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
38
Refer to the
following
content
Description:
Configures a DSS key as an LDAP key on the IP phone.
The digit 38 stands for the key type LDAP.
For line keys:
X ranges from 1 to 27.
For programable keys:
X ranges from 12 to 14.
For ext keys:
X ranges from 1 to 3, Y ranges from 1 to 60.
Example:
linekey.2.type = 38
Default:

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English