Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
526
Variable Value
Description
call.
The display name of the callee when the IP phone receives
an incoming call.
$display_remote
The display name of the callee when the IP phone places a
call.
The display name of the caller when the IP phone receives
an incoming call.
$call_id
The call-id of the active call.
$callerID
The display name of the caller when the IP phone receives
an incoming call.
$calledNumber
The phone number of the callee when the IP phone places
a call.
Procedure
Action URL can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure action URL.
Parameters:
action_url.setup_completed
action_url.registered
action_url.unregistered
action_url.register_failed
action_url.off_hook
action_url.on_hook
action_url.incoming_call
action_url.outgoing_call
action_url.call_established
action_url.dnd_on
action_url.dnd_off
action_url.always_fwd_on
action_url.always_fwd_off
action_url.busy_fwd_on
action_url.busy_fwd_off
action_url.no_answer_fwd_on
action_url.no_answer_fwd_off
action_url.transfer_call
action_url.blind_transfer_call