Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
528
Parameters
Permitted Values
Default
Configures the action URL the IP phone sends after startup.
The value format is: http(s)://<serverIPAddress>/help.xml? variable name=variable value.
Valid variable values are:
 $mac
 $ip
 $model
 $firmware
 $active_url
 $active_user
 $active_host
 $local
 $remote
 $display_local
 $display_remote
 $call_id
 $callerID
 $calledNumber
Example:
action_url.setup_completed = http://192.168.0.20/help.xml?IP=$ip
Web User Interface:
Features->Action URL->Setup Completed
Phone User Interface:
None
action_url.registered
URL within 511
characters
Blank
Description:
Configures the action URL the IP phone sends after an account is registered.
Example:
action_url.registered = http://192.168.0.20/help.xml?IP=$ip
Web User Interface:
Features->Action URL->Registered
Phone User Interface:
None