Configuring Advanced Features
561
2) Configure parameters of outbound proxy server 1 and outbound proxy server 2 in the
corresponding fields.
6. Click Confirm to accept the change.
To configure server redundancy for failover purpose via web user interface:
1. Click on Account->Register.
2. Select the desired account from the pull-down list of Account.
3. Configure registration parameters of the selected account in the corresponding fields.
4. Configure parameters of the SIP server 1 or SIP server 2 in the corresponding fields.
You must set the port of SIP server to 0 for NAPTR, SRV and A queries.
To Next Page
Loading...
Need help?
General
