Configuring Advanced Features
579
“managementserver.periodic_inform_enable” is set to 1 (Enabled).
Web User Interface:
Settings->TR069->Periodic Inform Interval (seconds)
Phone User Interface:
None
To configure TR-069 via web user interface:
1. Click on Settings->TR069.
2. Select Enabled from the pull-down list of Enable TR069.
3. Enter the user name and password authenticated by the ACS in the ACS Username and
ACS Password fields.
4. Enter the URL of the ACS in the ACS URL field.
5. Select the desired value from the pull-down list of Enable Periodic Inform.
6. Enter the desired time in the Periodic Inform Interval (seconds) field.
7. Enter the user name and password authenticated by the IP phone in the Connection
Request Username and Connection Request Password fields.
8. Click Confirm to accept the change.
To Next Page
Loading...
Need help?
General
