Yealink SIP-T58V/A

Configuring Audio Features
583
The ring tone format must meet the following:
Phone Model
Format
Single File Size
SIP-T58V/T58A/T56A
.wav
<=8MB
Note
Procedure
Ring tones can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.c
fg
Configure a ring tone for the IP phone.
Parameter:
phone_setting.ring_type
Specify the access URL of the custom ring
tone.
Parameter:
ringtone.url
Delete all custom ring tone files.
Parameter:
ringtone.delete
<MAC>.cfg
Configure a ring tone on a per-line basis.
Parameter:
account.X.ringtone.ring_type
Web User Interface
Upload the custom ring tones.
Configure a ring tone for the IP phone.
Navigate to:
http://<phoneIPAddress>/servlet?m=mod_
data&p=settings-preference&q=load
Configure a ring tone on a per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?m=mod_
data&p=account-basic&q=load&acc=0
Phone User Interface
Configure a ring tone for the IP phone.
Configure a ring tone for the account.
The ring tone file must be PCMU audio format, mono channel, 8K sample rate and 16 bit
resolution.