Yealink SIP-T58V/A User Manual

Configuring Audio Features
603
If the ringer device is set to Headset or Headset&Speaker, the headset (wired headset,
Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode
also should be activated in advance. You can press the HEADSET key to activate the headset
mode. For more information, refer to the Yealink phone-specific user guide .
Procedure
Ringer device for headset can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the ringer device for the IP
phone.
Parameter:
features.ringer_device.is_use_headset
Web User Interface
Configure the ringer device for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servlet?m=
mod_data&p=features-audio&q=load
Details of Configuration Parameter:
Parameter
Permitted Values
Default
features.ringer_device.is_use_headset
0, 1 or 2
0
Description:
Configures the ringer device for the IP phone.
0-Use Speaker
1-Use Headset
2-Use Headset & Speaker
If the ringer device is set to Headset or Headset&Speaker, the headset should be connected
to the IP phone and the headset mode also should be activated in advance.
Web User Interface:
Features->Audio->Ringer Device for Headset
Phone User Interface:
None
To configure ringer device for headset via web user interface:
1. Click on Features->Audio.

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English