Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
608
Configure the sending volume of the
headset.
Parameter:
voice.headset_send
Web User Interface
Configure the sending volume of the
speaker/handset/headset.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-audio&q=l
oad
Details of the Configuration Parameters:
Parameters
Permitted Values
Default
voice.handfree_send
Integer from -50
to 50
0
Description:
Configures the sending volume of the speaker.
Note: We recommend that you modify this parameter cautiously. An unreasonable value
may render the voice quality bad. If you change this parameter, the IP phone will reboot to
make the change take effect.
Web User Interface:
Features->Audio->Handfree Send Volume (-50~50)
Phone User Interface:
None
voice.handset_send
Integer from -50
to 50
0
Description:
Configures the sending volume of the handset.
Note: We recommend that you modify this parameter cautiously. An unreasonable value
may render the voice quality bad. If you change this parameter, the IP phone will reboot to
make the change take effect.
Web User Interface:
Features->Audio->Handset Send Volume (-50~50)
Phone User Interface:
None