Yealink SIP-T58V/A

Configuring Security Features
681
Parameters
Permitted Values
Default
Account->Register->SIP Server Y->Transport
Phone User Interface:
None
static.security.trust_certificates
0 or 1
1
Description:
Enables or disables the IP phone to only trust the server certificates in the Trusted
Certificates list.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will trust the server no matter whether the certificate
sent by the server is valid or not.
If it is set to 1 (Enabled), the IP phone will authenticate the server certificate based on the
trusted certificates list. Only when the authentication succeeds, the IP phone will trust the
server.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Security->Trusted Certificates->Only Accept Trusted Certificates
Phone User Interface:
None
static.security.ca_cert
0, 1 or 2
2
Description:
Configures the type of certificates in the Trusted Certificates list for the IP phone to
authenticate for TLS connection.
0-Default Certificates
1-Custom Certificates
2-All Certificates
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Security->Trusted Certificates->CA Certificates
Phone User Interface:
None