Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
684
Parameters
Permitted Values
Default
Phone User Interface:
None
static.phone_setting.reserve_certs_enable
0 or 1
0
Description:
Enables or disables the IP phone to reserve custom certificates after it is reset to factory
defaults.
0-Disabled
1-Enabled
Web User Interface:
None
Phone User Interface:
None
To configure TLS on a per-line basis via web user interface:
1. Click on Account->Register.
2. Select the desired account from the pull-down list of Account.
3. Select TLS from the pull-down list of Transport.
4. Click Confirm to accept the change.