Administrator’s Guide for SIP-T5 Series Smart Media Phones
734
static.custom_factory_configuration.url
URL within 511
characters
Description:
Configures the access URL of the custom factory configuration files.
Note: It works only if the value of the parameter
“static.features.custom_factory_config.enable” is set to 1 (Enabled) and the file format of
custom factory configuration file must be *.bin. If you change this parameter, the IP phone will
reboot to make the change take effect.
Web User Interface:
Settings->Configuration->Import Factory Configuration
Phone User Interface:
None
To import the custom factory configuration files via web user interface:
1. Click on Settings->Configuration.
2. Click Import to locate and import the custom factory configuration file from your local
system.
When the custom factory configuration file is imported successfully, you can reset the IP phone
to custom factory configurations. For more information on how to reset to factory configuration
via web user interface, refer to How to reset the IP phone to default factory configurations? on
page 731.
You can delete the user-defined factory configurations via web user interface.
To Next Page
Loading...
Need help?
General
