Setting Up Your System
73
2. Click Upload to locate and upload the TAR file from the local system.
The web user interface prompts the message “Operating, Please Wait…”.
3. In the VPN block, select the desired value from the pull-down list of Active.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the phone.
To configure VPN via phone user interface after uploading a TAR file:
1. Tap Settings->Advanced (default password: admin) ->Network->VPN.
2. Tap the On radio box in the VPN Active field.
You must upload the OpenVPN TAR file using configuration files or via web user interface
in advance.
3. Tap to accept the change.
The phone prompts you to reboot the phone.
4. Tap OK to reboot the phone.
The settings will take effect after a reboot.
To Next Page
Loading...
Need help?
General
