ZOLL R Series Service Manual

R Series Service Manual
9650-0903-01 Rev. L 3-7
Removing the Recorder,
AC Charger and Battery Well
1. Using a #2 Philips screwdriver, remove the 4
screws securing the AC Charger Assembly.
2. Remove the AC Charger assembly from the chassis by
lifting straight up. Unplug the cable from the charger to the
PD Engine as shown.
Note: During reassembly, torque to 10 in-lbs.

ZOLL R Series Specifications

General

Defibrillator Type	Manual and AED
Pacing	Yes
ECG Monitoring	Yes
SpO2 Monitoring	Yes
FAST-SpO2	Yes
IP Rating	IP55
Defibrillator Waveform	Biphasic
Energy Levels	1-360 Joules
Display	LCD
Pacer Type	Demand
Pacer Rate	30-180 ppm
Pacer Output	0 – 140 mA
EtCO2 Monitoring	Optional
NIBP Monitoring	Optional
Temperature Monitoring	Optional
Printer	Integrated
Battery Type	Lithium-ion
CPR Feedback	Yes
Data Storage	Internal memory
Connectivity	USB