1-7
Configuring an Event Entry
Select Device > RMON from the navigation tree and click the Event tab to enter the page, as shown in
Figure 1-5. Click Add to enter the page for adding an event entry, as shown in Figure 1-6.
Figure 1-5 Event entry
Figure 1-6 Add an event entry
Table 1-7 describes the items for configuring an event entry.
Table 1-7 Event entry configuration items
Item Description
Description Set the description for the event.
Owner Set the owner of the entry.
Event Type
Set the actions that the system will take when the event is triggered:
z Log: The system will log the event
z Trap: The system will send a trap in the community name of null.
If both Log and Trap are selected, the system will log the event and send a
trap; If none of them is selected, the system will take no action
Return to
RMON alarm configuration task list.
Configuring an Alarm Entry
Select Device > RMON from the navigation tree and click the Alarm tab to enter the page, as shown in
Figure 1-7. Click Add to enter the page for adding an alarm entry, as shown in Figure 1-8.
To Next Page
Loading...
