3Com Baseline 2928 PWR Plus - Page 172

1-10
Figure 1-9 Configure GigabitEthernet 1/0/1 as a trunk port and its PVID as 100
z Select Trunk in the Link Type drop-down list.
z Select the PVID check box, and then type in PVID 100.
z Select GigabitEthernet 1/0/1 on the chassis front device panel.
z Click Apply.
# Create VLAN 2, VLAN 6 through VLAN 50, and VLAN 100.
Select Network > VLAN from the navigation tree and click Create to enter the page for creating VLANs,
as shown in
Figure 1-10.