1-12
z Click Select.
Click Modify VLAN to enter the page for modifying the ports in a VLAN, as shown in
Figure 1-12.
Figure 1-12 Assign GigabitEthernet 1/0/1 to VLAN 100 as an untagged member
z Select 100 – VLAN 0100 in the Please select a VLAN to modify: drop-down list.
z Select the Untagged radio button.
z Select GigabitEthernet 1/0/1 on the chassis front device panel.
z Click Apply. A configuration progress dialog box appears, as shown in Figure 1-13.
Figure 1-13 Configuration progress dialog box
z After the configuration process is complete, click Close.
# Assign GigabitEthernet 1/0/1 to VLAN2, and VLAN 6 through VLAN 50 as a tagged member.
To Next Page
Loading...
