3Com Baseline 2928 PWR Plus - Page 196

1-15
Figure 1-14 Configure GigabitEthernet 1/0/1 as a hybrid port
z Select Hybrid from the Link Type dropdown list.
z Select the PVID option and type 2 in the text box.
z Select GigabitEthernet 1/0/1 from the chassis front panel.
z Click Apply.
# Assign GigabitEthernet 1/0/1 to VLAN 2 as an untagged member.
z Select Network > VLAN from the navigation tree, and click Modify Port on the displayed page to
enter the page shown in
Figure 1-15.