1-16
Figure 1-15 Assign GigabitEthernet 1/0/1 to VLAN 2 as an untagged member
z Select GigabitEthernet 1/0/1 from the chassis front panel.
z Select the Untagged option.
z Type in VLAN ID 2.
z Click Apply. A configuration progress dialog box appears, as shown in Figure 1-16.
Figure 1-16 Configuration progress dialog box
z After the configuration process is complete, click Close.
# Configure voice VLAN on GigabitEthernet 1/0/1.
z Select Network > Voice VLAN from the navigation tree, and click Port Setup on the displayed
page to enter the page shown in
Figure 1-17.
To Next Page
Loading...
