1-17
Figure 1-17 Configure voice VLAN on GigabitEthernet 1/0/1
z Select Manual in the Voice VLAN port mode drop-down list.
z Select Enable in the Voice VLAN port state drop-down list.
z Type in voice VLAN ID 2.
z Select GigabitEthernet 1/0/1 on the chassis front panel.
z Click Apply.
# Add OUI addresses to the OUI list.
z Click the OUI Add tab to enter the page shown in Figure 1-18.
Figure 1-18 Add OUI addresses to the OUI list
z Type in OUI address 0011-2200-0000.
z Select FFFF-FF00-0000 as the mask.
To Next Page
Loading...
