1-12
Figure 1-10 Add a port to the VLAN
z Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 in the Select Ports
field.
z Select the Untagged radio button for Select membership type.
z Type the VLAN ID 100.
z Click Apply to complete the operation.
# Enable IGMP snooping globally.
z Select Network > IGMP snooping in the navigation tree to enter the basic configuration page and
perform the following as shown in
Figure 1-11.
To Next Page
Loading...
