3Com Baseline 2928 PWR Plus - Page 344

1-5
Figure 1-5 Network diagram for configuring static ARP entries
Configuration procedure
# Create VLAN 100.
z Select Network > VLAN from the navigation tree, click the Add tab, and then perform the following
operations, as shown in
Figure 1-6.
Figure 1-6 Create VLAN 100
z Type 100 for VLAN ID.
z Click Create to complete the configuration.
# Add GigabitEthernet 1/0/1 to VLAN 100.
z Click the Modify Port tab and then perform the following operations, as shown in Figure 1-7.