1-6
Figure 1-7 Add GigabitEthernet 1/0/1 to VLAN 100
z Select interface GigabitEthernet 1/0/1 in the Select Ports field.
z Click on the Untagged radio button in the Select membership type field.
z Type 100 for VLAN IDs.
z Click Apply. A configuration progress dialog box appears, as shown in Figure 1-8.
Figure 1-8 Configuration progress dialog box
z After the configuration process is complete, click Close.
# Create VLAN-interface 100.
z Select Network > VLAN Interface from the navigation tree, click the Create tab, and then perform
the following operations, as shown in
Figure 1-9.
To Next Page
Loading...
