1-7
Figure 1-9 Create VLAN-interface 100
z Type 100 for VLAN ID.
z Select the Configure Primary IPv4 Address checkbox.
z Click on the Manual radio botton.
z Type 192.168.1.2 for IPv4 Address.
z Select 24 (255.255.255.0) for Mask Length.
z Click Apply to complete the configuration.
# Create a static ARP entry.
z Select Network > ARP Management from the navigation tree to enter the default ARP Table page.
Click Add Perform the following operations, as shown in
Figure 1-10.
Figure 1-10 Create a static ARP entry
z Type 192.168.1.1 for IP Address.
z Type 00e0-fc01-0000 for MAC Address.
To Next Page
Loading...
