3Com Baseline 2928 PWR Plus - Page 371

1-16
# Configure the RADIUS authentication servers.
z From the navigation tree, select Authentication > RADIUS. The RADIUS server configuration
page appears.
Figure 1-15 RADIUS authentication server configuration
Perform the following configurations as shown in
Figure 1-15.
z Select Authentication Server as the server type.
z Enter the primary server IP address 10.1.1.1.
z Select active as the primary server’s status.
z Enter the secondary server IP address 10.1.1.2.
z Select active as the secondary server’s status.
z Click Apply.
# Configure the RADIUS accounting servers.
Figure 1-16 RADIUS accounting server configuration
Perform the following configurations as shown in
Figure 1-16:
z Select Accounting Server as the server type.
z Enter the primary server IP address 10.1.1.2.
z Select active as the primary server’s status.