1-14
Figure 1-11 Create an ISP domain
Perform the following configurations, as shown in
Figure 1-11.
z Enter test in the Domain Name textbox.
z Select Enable to use the domain as the default domain.
z Click Apply.
# Configure the AAA authentication method for the ISP domain.
z Select the Authentication tab.
Figure 1-12 Configure the AAA authentication method for the ISP domain
Perform the following configurations, as shown in
Figure 1-12.
z Select the domain name test.
z Select the Default AuthN checkbox and then select RADIUS as the authentication mode.
z Select system from the Name drop-down list to use it as the authentication scheme.
z Click Apply. A configuration progress dialog box appears, as shown in Figure 1-13.
To Next Page
Loading...
