1-15
Figure 1-13 Configuration progress dialog box
z After the configuration process is complete, click Close.
# Configure the AAA authorization method for the ISP domain.
z Select the Authorization tab.
Figure 1-14 Configure the AAA authorization method for the ISP domain
Perform the following configurations, as shown in
Figure 1-14.
z Select the domain name test.
z Select the Default AuthZ checkbox and then select RADIUS as the authorization mode.
z Select system from the Name drop-down list to use it as the authorization scheme.
z Click Apply. A configuration progress dialog box appears.
z After the configuration process is complete, click Close.
# Configure the AAA accounting method for the ISP domain, and enable accounting optional.
z Select the Accounting tab.
To Next Page
Loading...
