2-13
Task Remarks
Creating a Traffic Behavior
Required
Create a traffic behavior.
Configuring Traffic
Mirroring and
Traffic Redirecting
for a Traffic
Behavior
Configure a
traffic
behavior
Configuring
actions for a
behavior
Configuring Other
Actions for a
Traffic Behavior
Use either approach
Configure various actions for the traffic
behavior.
Creating a Policy
Required
Create a policy.
Configure a
policy
Configuring Classifier-Behavior
Associations for the Policy
Required
Associate the traffic behavior with the
class in the QoS policy.
A class can be associated with only one
traffic behavior in a QoS policy.
Therefore, associating a class that is
already associated with a traffic behavior
will overwrite the old association.
Apply the
policy
Applying a Policy to a Port
Required
Apply the QoS policy to a port.
Configuring queue scheduling
Perform the task in Table 2-7 to configure queue scheduling.
Table 2-7 Queue scheduling configuration task list
Task Remarks
Configuring Queue Scheduling on a Port
Optional
Configure the queue scheduling mode for a port.
Configuring line rate
Perform the task in Table 2-8 to configure line rate.
Table 2-8 Line rate configuration task list
Task Remarks
Configuring Line Rate on a Port
Required
Limit the rate of incoming packets or outgoing
packets of a physical port.
Configuring the priority mapping tables
Perform the task in Table 2-9 to configure the priority mapping tables:
To Next Page
Loading...
