2-14
Table 2-9 Priority mapping table configuration task list
Task Remarks
Configuring Priority Mapping Tables
Required
Set priority mapping tables.
Configuring priority trust mode
Perform the task in Table 2-10 to configure priority trust mode:
Table 2-10 Priority trust mode configuration task list
Task Remarks
Configuring Priority Trust Mode on a Port
Required
Set the priority trust mode of a port.
Creating a Class
Select QoS > Classifier from the navigation tree and click Create to enter the page for creating a class,
as shown in
Figure 2-11.
Figure 2-11 The page for creating a class
Table 2-11 shows the configuration items of creating a class.
To Next Page
Loading...
