2-15
Table 2-11 Configuration items of creating a class
Item Description
Classifier Name
Specify a name for the classifier to be created.
Operator
Specify the logical relationship between rules of the classifier.
z and: Specifies the relationship between the rules in a class as logic
AND. That is, the device considers a packet belongs to a class only
when the packet matches all the rules in the class.
z or: Specifies the relationship between the rules in a class as logic OR.
That is, the device considers a packet belongs to a class as long as
the packet matches one of the rules in the class.
Return to
QoS policy configuration task list.
Configuring Classification Rules
Select QoS > Classifier from the navigation tree and click Setup to enter the page for setting a class,
as shown in
Figure 2-12.
Figure 2-12 The page for configuring classification rules
To Next Page
Loading...
