ABB ACS880 - Page 172

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Status of opening 1 in the application program.Opening1b0
Status of opening 2 in the application program.Opening2b1
Status of opening 3 in the application program.Opening3b2
Status of opening 4 in the application program.Opening4b3
Status of opening 5 in the application program.Opening5b4
Status of opening 6 in the application program.Opening6b5
Status of opening 7 in the application program.Opening7b6
Status of opening 8 in the application program.Opening8b7
Status of opening 9 in the application program.Opening9b8
Status of opening 10 in the application program.Opening10b9
Status of opening 11 in the application program.Opening11b10
Status of opening 12 in the application program.Opening12b11
Status of opening 13 in the application program.Opening13b12
Status of opening 14 in the application program.Opening14b13
Status of opening 15 in the application program.Opening15b14
Status of opening 16 in the application program.Opening16b15
1 = 10000h…FFFFh
0 / uint32
(Only visible with option +N8010 [application
programmability])
First five ASCII letters of the name given to the application
program in the programming tool. The full name is visible
under System info on the control panel or the Drive
Composer PC tool.
_N/A_ = None.
Application name7.23
0 / uint32
(Only visible with option +N8010 [application
programmability])
Application program version number given to the
application program in the programming tool. Also visible
under System info on the control panel or the Drive
Composer PC tool.
Application version7.24
0 / uint32First five ASCII letters of the name given to the
customization package. The full name is visible under
System info on the control panel or the Drive Composer
PC tool.
_N/A_ = None.
Customization
package name
7.25
0 / uint32Customization package version number. Also visible under
System info on the control panel or the Drive Composer
PC tool.
Customization
package version
7.26
- / uint16Shows the status of the adaptive program.
See section Adaptive programming (page 31).
Adaptive program
status
7.30
1 = Adaptive program initializedInitializedb0
1 = Adaptive program is being editedEditingb1
1 = Editing of adaptive program finishedEdit doneb2
172 Parameters