ABB ACS880 - Page 254

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
6
Digital input DI4 (10.2 DI delayed status, bit 3).
DI4
7
Digital input DI5 (10.2 DI delayed status, bit 4).
DI5
8
Digital input DI6 (10.2 DI delayed status, bit 5).
DI6
11
Digital input/output DIO1 (11.2 DIO delayed status, bit 0).
DIO1
12
Digital input/output DIO2 (11.2 DIO delayed status, bit 1).
DIO2
See Terms and abbreviations (page 132).
Other [bit]
30.00 rpm / real32Defines the zero speed limit. The motor is stopped along
a speed ramp (when ramped stop is selected) until the
defined zero speed limit is reached. After the zero speed
delay, the motor coasts to a stop.
Note: If you use a value below the default, make sure the
drive is able to stop.
Zero speed limit21.6
- / -
Zero speed limit. For scaling, see parameter 46.1.
0.00 ... 30000.00 rpm
254 Parameters